Do not do that again, this is the correct use of gear motor

Gear WAH hypoid gearbox use skills:
1, in the gear after the operation of 200 ~ 300 hours, should be the first oil change, the use of the future should be regularly check the quality of oil, mixed with impurities or deterioration of oil to be replaced. Under normal circumstances, for long-continuous continuous gear motor, according to the operation of 5000 hours or once a year to replace the new oil, PC Helical Gearbox gear, before re-operation should also replace the new oil, not with different grades of oil phase Mixed with the same grade and different viscosity of the oil allowed to mix.
2. The gears should wait for the combination gearbox to cool down without burning hazard, but should remain warm, because after the complete cooling, the viscosity of the oil increases and the oil is difficult. Note: to cut off the power supply to prevent inadvertently power!
3. Work, when the oil temperature rise above 80 ℃ or oil tank temperature exceeds 100 ℃ and produce abnormal noise and other phenomena should stop using, check the reasons, must be troubleshooting, the replacement of lubricants before they can continue to run.
4. The user should have a reasonable use of gears to maintain gear motor regulation system, the industrial gearbox types operation and inspection found in the problems should be carefully recorded, the above provisions should be strictly enforced.