Hardened reducer wear treatment

As an essential component screw lifts and other transmission products, Hardened reducer stability of the entire transmission system plays a decisive role. If in the case of the buying process, the purchase does not meet the requirements of hardness cycloidal reducers, or overload will accelerate wear hardened gear, which will affect the normal operation of the transmission system.
A: prolonged use of the main performance failure: the process of using vibration reducer enhancement, noise increases.
Two: there may be some parts have been damaged gear: gear tooth wear, gear shaft bore and keyway subjected to wear; screw holes at the bearing hole because of wear can easily lead screw loose; the shaft surface and the keyway is also very easy to use because the time is too long which causes wear.
Three: Repair mode: restorative Hardened reducer is not at all have the technical strength and maintenance repair, but if it is large-scale equipment, maintenance of the parts will be able to find targeted repair.
(1) If it is because shaft mounted speed reducer shaft wear surface of the shaft hole keyway and other places, we can take the electroplating method to recover part of the original accuracy.
(2) If the machine Hardened reducer tooth broken, it can only replace the new part of. Hardened reducer in order to ensure the life cycle, we buy when Hardened reducer, be sure to choose the right model, thus ensuring the safety factor Hardened reducer, you must also strictly comply with the operating instructions for the hard tooth surface reducer can achieve the greatest effect.